SKIP PAN: New 5'x8'x24" material handling skip pan
New 5'x8'x24" material handling skip pans

Stainless Steel Tanks:Used 750 gallon 304 stainless steel verticat conical bottom tank (fermenter tank)
Used 750 gallon 304 stainless steel verticat conical bottom tank (fermenter tank) Distillery

Stainless Steel Tanks:Used Cherry Burrell 130 gallon vertical stainless steel cone bottom tank
Used Cherry Burrell 130 gallon vertical stainless steel cone bottom tank

Stainless Steel Tanks: Used 110 gallon vertical stainless steel cone bottom tank
Used 110 gallon vertical stainless steel cone bottom tank

Stainless Steel Tanks: Used Cherry Burrell 1500 gallon stainless steel processor coil jacket
Used Cherry Burrell 1500 gallon stainless steel processor
Request For Information

Shipping Information

Products


   

Description

1.

 

Agitator: Used Lightnin model ND-2ASCR .25 hp clamp-on hazardous conditions agitator
Used Lightnin model ND-2ASCR .25 hp clamp-on agitator. Stainless steel shaft is 1-1/2" in diameter and 63" long with a 12" diameter 3 blade propeller with a 6.75" diameter ring. The agitator has a .25 hp 1725 rpm motor that is tagged for hazardous locations. Requires 90 vdc electrical supply. Serial number 7810267.
Item No. MTF02012-6313

2.

 

Agitators: Used Lightnin Agitator 1/2 HP V6C37
Used Lightnin agitator drive. Vektor model V6C37. 1/2 HP 1.2/.6 AMPS
Item No. MTF01099-0007

3.

 

Agitators: Used Lightnin Agitator 1/2 HP V6C37
Lightnin agitator Vektor model V6C37. 1/2 HP. 1.2/.6 AMPS, Vari-Torq 2.6/1.3, 230/460 Volt.
Item No. MTF01099-0008

4.

 

Agitator - 3/4 HP Lightnin Agitator V6S55
Used Lightnin agitator drive. Vektor model V6S55. 3/4 HP 115/230 Volt 1725 RPM.
Item No. MTF02002-0870

5.

 

Agitator - Used 1.5 hp Lightnin XLC-100D Agitator
Used lightnin Model XLC-100D top entry agitator drive. 1.5 HP 3-phase Low Volt 208/200 High Volt 460/400 1725/1425 RPM motor has pedastal mount
Item No. MTF02002-0869

6.

 

Agitator - Used 7.5 hp Philadelphia Agitator PTE-06
Used rebuilt Philadelphia Mixer agitator drive. TYPE PTE-06. Input RPM 1750, Ratio 7.5-1, Output RPM 100.
Item No. MTF02002-0877

7.

 

Agitators: Used Pfaudler 5.0 TW drive
Used Pfaudler 5.0 TW drive. 1750 ROM, P ratio 1.5-1, S. ratio 10-1, O. ratio 15-1. Driven by 15/7.5 HP, 3/60/460 volt motor. Frame size 284 TD. RPM 1775/885 FOB: NC
Item No. MTF02070-0002

8.

 

Agitator - Chemineer 1-HTN-5 Right Angle Agitator
Used Chemineer right angle agitator drive. Model 1-HTN-5, S/N 1-86299-1. Driven thru a Westinghouse 5/2.2 HP 3/60/460 volt motor. Input RPM 1800/1200.
Item No. MTF02002-0873

9.

 

Agitators: Used 15 hp Philadelphia mixer drive Model PTE-12
Used Philadelphia mixer drive. Model PTERO-12. HP rating 17.8, input 1750 RPM, output 30 RPM, Ratio 58.3:1. S/N 303075. Service Factor 1.25. Driven by Allis Chambers induction motor 15HP 3/60/230-460 volt, 1750 RPM.
Item No. MTF02071-0022

10.

 

Agitators: Used 30 hp Philadelphia mixer drive MV20-PTVS
Used Philadelphia mixer drive size MV20-PTVS. S/N 74095. Input 1384 RPM, ratio 86.3:1, output 16 RPM. Driven by TECO MAX-E Premium efficiency severe duty 3-phase induction motor. 30HP 3/60/ 230-460 volt, 1175 RPM. Frame 326T. 12" top flange mount.
Item No. MTF02071-0016

11.

 

Agitators: Used 30hp Philadelphia mixer drive MV20-PTVS 30HP
Used Philadelphia mixer drive size MV20-PTVS. S/N 74094. Input 1384 RPM, ratio 86.3:1, output 16 RPM. Driven by TECO MAX-E Premium efficiency severe duty 3-phase induction motor. 30HP 3/60/ 230-460 volt, 1175 RPM. Frame 326T. 12" top flange mount. Has been cleaned and painted
Item No. MTF02071-0014

12.

 

Agitators: Used 40 hp Philadelphia mixer drive MV20-PTVS
Used 40 hp Philadelphia mixer drive size MV20-PTVS. Input 1384 RPM, ratio 86.3:1, output 16 RPM. Driven by 40HP 3/60/ 230-460 volt, 1175 RPM. 12" top flange mount. Equipped with Dynamatic Ajusto-spede 40HP max RPM 1000. Min RPM 100. Stainless steel output shaft for agitator.
Item No. MTF02071-0015

13.

 

Agitator: Used 40 hp Philadelphia mixer drive MV20-PTVS
Used Philadelphia mixer drive size MV20-PTVS. Input 1384 RPM, ratio 86.3:1, output 16 RPM. Driven by 40HP 3/60/ 230-460 volt, 1175 RPM. 12" top flange mount. Equipped with Dynamatic Ajusto-spede 40HP max RPM 1000. Min RPM 100. Stainless steel output shaft for agitator
Item No. MTF02071-0017

14.

 

Agitator: Unused Lightnin Model XJC-30 316 S/S threaded drive shaft
Unused Lightnin Model XJC-30 agitator drive. S/N 97E93816. Aluminum housing with 316 stainless steel 1" diameter threaded drive shaft. 5" 316 S/S mounting flange with low pressure stuffing box. Driven by .30HP 3/60-50/230-460 Volt 1800 RPM Dura-Mix Motor. No shaft or impeller included.
Item No. MTF02095-0003

All prices in US Dollars

Home | Agitators | Air Circulators | Air Handlers | Bins | Blowers | Boilers | Centrifuge | Chillers/Cooling Towers | Columns | Compressed Air Dryer | Compressors | Dryers | Filters | Gear Reducers | Glass Lined Tank Parts | Glove Box | Heat Exchangers | Hoists | Kettle/ReactorS | Lab Mixing Tank | Mills | Magnetic Separators | Mixers | Ovens | Presses | Pumps | Reverse Osmosis | Screens | Tanks | Volmetric Feeders | Washers | Water Treatment | Links


info@MyTankFarm.com
Phone 336 549-2137
Fax 336 674-3399
MyTankFarm
Division of ShopTime,Inc.
3904 SE School Road
Greensboro, North Carolina 27406
mytankfarm@aol.com

2005-2011 Copyright MyTankFarm, Division of ShopTime, Inc.
Top^